3ds Max TUTORIAL – Car Rigging Tutorial, Advanced Car Rig Ferrari Enzo

Check what you can do with this rig http://www.youtube.com/watch?v=zNDfABLJ8uE Copy and paste Float expression for suspension damping travel (works without a…
Video Tutorial Rating: 5 / 5

Don’t forget to check out our other video tutorials or share this video with a friend.

0 votes

Loading... 1,960 views

6 responses to “3ds Max TUTORIAL – Car Rigging Tutorial, Advanced Car Rig Ferrari Enzo”

1. Kornél Sevinger says:

   04/02/2014 at 5:31 am

   At me, the suspension had a little strange movement, it goes down a bit at
   the middle even if you push the lower part upwards. Im used
   this(p1-0.06-0.5*p1) expression instead. Its actually harder to setup
   because i just write it in hurry, but its more realistic.
   BTW at the orientation constraint part(41:20), i think its a good idea to
   add the other dummy as orientation target too, and weight them 50-50.

   Reply
2. Howard Smoot says:

   04/02/2014 at 5:42 am

   My back wheels turn (steer)! help!

   Reply
3. AAron Production - Visionlore says:

   04/02/2014 at 6:38 am

   you probably linked back wheel dummies to steering controler.. or the
   wheels themselves.. first solution is break the link of wheels and re link
   them to the correct dummy .. check if when you steer some of the back
   dummies steer as well.. if not then you probably just linked the
   wheels…if yes you back linked dummies to steering..break link and re link
   them according to wheel hubs linking pattern..if thats of any help 🙂

   Reply
4. AAron Production - Visionlore says:

   04/02/2014 at 6:58 am

   try to rerun the part with dummies at axle and above.. hard to tell what
   screwed up… after you finish inner upper dummy wont move (pitch roll) but
   the outter upper dummy (one you actual grab to animate) should move along
   when you move wheel hub for spring and damping motion

   Reply
5. Music Digest says:

   04/02/2014 at 7:13 am

   nice video – cool tutorial, excellent 🙂

   Reply
6. AAron Production - Visionlore says:

   04/02/2014 at 7:43 am

   just realize that inner upper dummy stays in place when you spring wheels
   or when you move IK chain with outter upper dummy…IK chain moves as an
   average between inner upper dummy one that stays in place and outter upper
   dummy (one you control pitch and roll with)… also re link upper dummis to
   the axle dummies.. cuz if they are not linked.. they wont move with car
   when you grab overall car controler (circle in front) my guess.. RE-Link
   upper dumies or do them again

   Reply